Home ServiceFAQHow to operate towable boom lift?

How to operate towable boom lift?

 

Boom lift is widely used in street lights maintenance, cleaning, installation, landscape engineering, television camera, decoration, advertising, communications engineering, airport, and another places need to work at height.

 

Now the towable boom lift is very popular, we just finished one as sample, welcome to visit our factory and test the machine.

 

Firstly, before using, you need to notice these as follows:

1. Before the operation, must be assured that the truck in a solid level ground. To determine the hand brake has brake position, all the necessary accessories must be in place (such as tire pads, safety warning flags, etc.). Legs must be supported on solid ground, in order to ensure stability. If you must work on slopes situation (max 5 °), must be fully extended legs, and operated in high-slope side.

2. The operator on the bucket must wear protective safety equipment specification requirements, and fixed in a safe anchor ring.

3. Control valve should be operated and handled slowly, in order to achieve smooth movement, to prevent a sudden start or stop, to prevent contact with solid objects, arm and bucket work, such as tree branches, buildings, etc

4. The load capacity is 200kg, not allowed to overload

5. Could not allowed the bucket in a situation of side working ,next to the bucket load, or lift from the bucket to the un-target subject, bucket prohibit to hang goods.

 

And then we start to operate the towable man lift?

1. Open the support legs, press the handle down, support legs stretch, press the handle up, supports legs retraction.

2. Dual control, you can control it on the ground and platform.

And to make the vehicle in good condition and improve the service life, you need regularly maintenance and repair. Find fault and solve in time to prevent accidents.

1. Visual appearance, to determine the shape is good or not, whether the hydraulic components and piping leaks oil traces, if any leakage, the timely replace seals.

2. Check the key components and fasteners loose coupling, and timely fastening.

3. According to the lubrication sheet lubrication requirements for all components, check the hydraulic oil tank.

4. Check the hydraulic hoses for wear, loose connections or oil leakage. Especially on the pipeline.

5. Check all welding point, especially bucket; arm, turntable, and other key parts of the weld rod have hairline cracks or cracks. If so, you should immediately stop and inform using the company's maintenance notice, are not allowed to weld personally.

 

We have battery and diesel power for optional, you can tell us the lifting height, we can customize according to your requirement. Any questions, welcome to contact us.